November 29, 2005

Hallelujah, praise the lord, and pass the ammunitions

From Global Security:
"The US Special Operations Command [USSOCOM] issued a solicitation in August 2005 to obtain commercially available non-developmental item (NDI) Joint Combat Pistol (JCP) system, Caliber .45 (ACP). The Program (which absorbed an earlier Future Handgun System program) will use full and open competition to fulfill the JCP requirement. The JCP will be delivered in accordance with specification entitled "Performance Specification Joint Combat Pistol" to be provided with issuance of the solicitation. Two configurations of the pistol will be required. One configuration will have no external safety and the other configuration will have an external safety.

The Combat Pistol System consists of: a Caliber .45 pistol and its ancillary equipment including: Magazines (standard and high-capacity); Suppressor Attachment Kit for operation of the pistol with and without sound suppressor; Holster; Magazine Holder (standard and high-capacity); Cleaning Kit; and Operator's Manual..."

I've been saying this was coing for a while now, first it goes to SOCOM, then we may see general issue. The Contractor grapevine has been buzzing that the RFP was written just for HK to get the bid, but we'll see.

Oh but this requirement... I mean DAMN:

"When fired from a rest, at a range of 50 meters, the mean radius of a 10-shot group fired from the JCP shall not be greater than A) 3.15 inches or B)1.8 inches over baseline ammunition performance, whichever is less (T). Baseline ammunition performance is defined as the average mean radius plus two sample standard deviations of three 10-shot groups fired from a test barrel at 50m."
That's serious match pistol performance. COnsidering it's expected to have an MRBS (Mean Rounds Between Stoppage) or 2000 rounds, that's gonna be tough. Theres only one .45 pistol I know to have done that, with that level of accuracy, and that's the Springfield FBI model.

Then theres this:

"The JCP shall have a standard magazine capacity of no less than eight [8] rounds (T), greater than eight [8] rounds (O) of .45 ACP ammunition. The JCP shall also have a high-capacity magazine of no less than ten [10] rounds (T), fifteen [15] rounds (O), of .45 ACP ammunition."
Hmmmm... somebody is either thinking HKP2000/USP Compact, a SIG P220, or a 1911...

and these two narrow it down further:


"The JCP length, with standard barrel, shall be less than 9.65 inches (T). The JCP width shall be less than 1.53 inches (T).

The JCP shall function in double action/single action (DA/SA) or double-action only (DAO) including Striker-Fired Action (SFA) (T). The JCP should have a modular action mechanism that allows reconfiguration at the unit level without modification to the weapon’s major assemblies (O).

All DA/SA pistols shall have a consistent trigger pull of eight to ten [8-10] pounds on Double Action, and a consistent trigger pull of four to six [4-6] pounds on Single Action and all DAO pistols shall have a trigger pull of five to eight [5-8] pounds (T). All pistols shall have a trigger pull that is consistent within one [1] pound from average pull (T). When pressure is applied to the JCP trigger and then released, the trigger shall reset to its forward-most position, even if the pistol is not fired (T). The operator shall be capable of pulling the trigger, without shifting the firing grip."

Uhhh yep, looks like a SIG or an HK to me, and HK is "owed" a major military contract. Actually the more you read, the clearer it is that this was indeed written for HK to win. Read the whole thing.

HT: River Dog

Posted by cbyrne at November 29, 2005 02:14 PM | TrackBack
Comments
Post a comment









Remember personal info?