February 13, 2006

Mighty Rat

In the hot rodding world, there are generally two types of Chevy motors; Mouse motors are small block V8's, and Rat motors are big block V8's.

Each of the major manufacturers has small and big blocks. Each small block was available in a large number of displacements and configurations, as was each big block, but they were all based on the same two cores (a large and a small) with similar mounting points, accessories etc... and they can often be installed in the same cars. The traditional mouse and rat motors are the Small Block Chevy (available between 265 and 400 C.I.D, but most commonly a 350), and the Big Block Chevy (from 348 to 560 C.I.D., but never more than 455 from the facotry, and most often seen as the 454).

I don't know who coined the term, but it's been around for a loooong time.

A couple months back I wrote about my new pocket tgun, the Kel-Tec P3AT, that we've taken to calling "Mighty Mouse". Well, mighty mouse now has a big brother.

Everybody say hello to Mighty Rat:

From the press release:

The PF-9 is a semi-automatic, locked breech pistol, chambered for the 9 mm Luger cartridge. It has been developed from our highly successful P-11 and P-3AT pistols with maximum concealability in mind. The PF-9 has a single stack magazine holding 7 rounds. It is the lightest and flattest 9 mm ever made. Firing mechanism is Double-Action Only with an automatic hammer block safety. The PF-9 will be available in blued, parkerized, and hard chrome finishes. Grips will be in black, grey, and olive drab.

The PF-9 accessory rail will accept the latest compact weapon lights and lasers.

The PF-9 retains the best features from our P-11 and P-3AT pistols combined into the flattest and lightest single stack 9mm configuration ever made. The barrel, locking system, slide stop, assembly pin, front sight, recoil springs and guide rod are adapted from the P-11. The PF-9 is nearly identical to the P-11 in length and height and shares the same exterior controls. The shorter trigger system with integral hammer block and the extraction system are adapted from the P-3AT. Just like the P-11, the PF-9 will accept +P ammunition, however, not with continuous use.

The rear sight is a new design and is adjustable for windage with the supplied allen wrench as well as for elevation with the use of shims (not included). The included 7 round rectangular magazine is supplied with a finger extension base plate and numbered holes. The under barrel accessory rail shares the dimensions of the MIL-STD-1913 picatinny rail although there is only one locking notch in the forward position.


SUGGESTED RETAIL PRICES
Description -- Price
PF-9 Pistol, Blued -- $314.00
PF-9 Pistol, Parkerized -- $355.00
PF-9 Pistol, Hard Chrome -- $368.00

The PF-9 pistol comes with one 7 round magazine, and includes a gun lock.

Expected availability: May 2006

I need one; hell EVERYBODY needs one.

Kel-Tec is definitely going right after Kahr with this model.

The P9 is half the price, thinner, and ligther than the smallest Kahr, a bit taller WITH the finger grip mag extension, but it holds 1 more round (putting the grip extension on the on the kahr makes it 1/2” taller than the Kel-Tec).

Comparing the P9 to the non-micro standard frame polymer kahr’s which have the same 7+1 capacity as the kel-tec, it’s half an inch shorter in length, .25” shorter in height, and 3 oz lighter.

In fact the only smaller 9mm made is the Rohrbaugh; and theres a 1+ year waiting list for a $900 gun that only writers have got their hands on so far.

Compared to the P3AT in .380, already about the smallest and lightest pistol in IT’S class, the 9mm P9 is only 4.4oz heavier, .65” longer and .8” taller (again with the finger extension. The extension adds .5” to the p3at).

I own a Kahr, and it is a GREAT CCW piece, but it really is definitely a belt gun because it is just a bit too long, a bit too tall, and a bit too heavy for a pocket. The new P9 is jsut the ticket for a 9mm pocket gun. It’s big enough to be controllable, but still small enough for the pocket.

I could live without the rail, in fact I think that cros slot may catch in a pocket; but you can alway fill it in, or slap a rail cover on there.

Hell I showed it to Mel, and she wants one too for her purse/jeans gun for when the sp101 doesnt fit.

Oh and why mighty rat? Shouldnt the rat be a .40 or a .45... Well the Small Block chevy started with the 265, and ended up as big as a 400. The little Kel-Tec mouse gun started off as a lowly .32, and is currently in a .380. The rat here is starting of as a 9mm, but who knows, maybe it can end up a .357 sig?

Posted by cbyrne at February 13, 2006 03:59 PM | TrackBack
Comments
Post a comment









Remember personal info?